Our Rectifier Style Enclosures are the ideal solution for mounting batteries or electrical hardware utilizing standard 19 or 23” racks. This top-of-the-line ground mounted enclosure come with a many features and options like keyed front doors, removable front and rear access doors, and the ability to mount 19 and 23” Standard Racks. These systems can be found in most hardware catalogs including the Hoffman Electrical/Electronic Enclosures and Equipment Specifiers Guide, and allow for removable shelves, equipment panels and other electrical mounting structures.

Battery Enclosures are designed and engineered specifically for the PV industry, and are in use throughout the world. With Two Seas you're assured of an enclosure that will meet even the most rigorous requirements of your installation.

Our 1624BE Series Enclosures are designed for maximum versatility and security. Configured to hold 1, 2 or 4 Group 31 or smaller batteries, these durable models can be mounted to either a 2 to 6” pole, a flat surface or a concrete pad. Our pole mounting hardware is designed so as not to allow removal from the outside of the enclosure. All enclosure latches feature a round tumbler design adding to the overall security of the unit. Other features include: removable control panel for pre-assembly of electrical components, removable door and battery trays, passive venting, all aluminum construction*, white powder coat finish and conforms to NEMA 3R rating. * Some models utilize powder coated steel trays.

Enclosures are made for floor or pole installation of 1, 2, or 4 Group 27 batteries. They include the following features:

• Manufactured to NEMA-4* standards, providing outdoor protection against wind, blown dust, rain, sleet, and ice (other configurations available).

• Heavy duty cold-rolled steel construction -16 guage body, with 14 guage door and tray.

• Glossy white powder-coat finish (Class B) on all surfaces for high durability.

• Removable aluminum back panel allows for mounting of charge controller, combiner equipment, and other electrical components.

• Removable door and battery shelves for easy installation and accessibility.

• Ventilation holes at top and bottom for convection cooling, covered internally with removable, washable filters attached with velcro.

• Acid-neutralizing Battery Mat^TM included to protect against battery leaks.

• Hardware supplied for mounting enclosure to both pole and ground mounts.

• Mounting nuts accessible only from within enclosure for increased security.

• Stainless steel and lockable hasp and pad (supplied with two keys.

• Battery straps (meets Zone 4 seismic specs).
   

• Options available:

  • Isolation shelves

  • Sealed electronics compartment

  • Active venting location

Our Chest Style Enclosures are designed for high volume installations and allow flexibility for use in many applications. These enclosures can mount to the floor, include electrical knockouts for wiring and fulfill the requirements for NEMA 3R. Do to their larger size these enclosures can accommodate a number of electrical components and batteries in various configurations!

Standard Features
• Meets NEMA 3R
• All aluminum construction
• Tamper resistant latches with pad-lock feature
• Passive venting
• Louvers
• Powder coat finish
 

OKCS-100: Description: Holds over 22 cubic feet for various battery and electrical hardware configurations Dimensions: 47 x 33 x 25

OKCS-200: Description: Holds over 35 cubic feet for various battery and electrical hardware configurations Dimensions: 60 x 33.5 x 30

OKCS-300: Description: Holds over 31 cubic feet for various battery and electrical hardware configurations Dimensions: 55 x 33 x 30

OkCS-400: Description: Holds over 33 cubic feet for various battery and electrical hardware configurations Dimensions: 53 x 36 x 30`

Need a safe and economical way to store large batteries? Our “BEE” Battery Enclosures provide NEMA 3R rated storage of the largest batteries on the market in various quantities. The installer can mount these enclosures onto the floor and safely lock the contents with tamper resistant hardware. Electrical knock-outs are also available in convenient locations for running electrical wiring. The BEE series represents our most economical, large battery storage enclosure and can also be used to house electrical component

Our NEW OES Series Battery Enclosures offer an economical solution for pole mounting batteries and equipment. Configured to hold 1, 2 or 4 Group 31 or smaller batteries, plus a removable control panels for pre-assembling of components outside of the enclosure! Our new “Mini” OES model is designed for use where smaller batteries are all that is needed and incorporate all the features standard to this model. These features include: 2-6” pole mounting hardware, removable door and control panel, safe and secure round tumbler latches, passive venting, all aluminum construction, powder coated white and the NEMA 3R rating.

LCF Series Enclosures offer an efficient and economical solution to high volume, low cost protection for installations requiring 1 or 2 Group 27 and smaller batteries. These enclosures come standard with mill finished aluminum and mount to almost any type of pole or flat surface. Other standard features include: removable control panel, full length piano hinge on the door, pad-lockable compression latch, passive ventilation and meets NEMA 3R requirements. An available option includes hardware for mounting to a 2-6” pole. This enclosure can be used in conjunction with our HPM-UNI™ Single Panel Side of Pole Mount for a variety of applications include renewable power for water pumps, garage door openers, security, lighting, and road signs. All models can ship UPS!

Our newest and most value-oriented enclosure meets NEMA 3R requirements, but is so economical it can be used in NEMA 1 applications as well! These enclosures will also hold a single battery up to Group 27 in size. Standard features include: easy slide-off front cover, passive venting, all aluminum construction and while powder coat finish. Additional options include pole mounting for 2-6” poles, tamper resistant hardware* and all steel or stainless steel construction*. All models can ship UPS!

Our Knock-Down Battery Racks include all hardware for quick assembly and because of their extremely durable construction, have been successfully tested with loading of 1000 lbs per shelf! These economical battery racks will reduce your shipping costs by shipping UPS, with one rack per carton and could easily outlast the batteries that they hold! For added stability and safety, our battery racks have the ability to bolt down to the floor or concrete pad.

KDR-827
Description: Holds (8) Group 27 batteries on two shelves
Dimensions: 36 x 14 x 30

KDR-827-DT
Description: Optional Dust Tray for KDR-827
Dimensions: 1 set is 2 ea.

KDR-48D
Description: Holds (4) 8D batteries on one shelf
Dimensions: 46.5 x 22 x 5

KDR-48D-DT
Description: Optional Dust Tray for KDR-48D
Dimensions: 1 set is 1 ea.

KDR-88D
Description: Holds (8) 8D batteries on two shelves
Dimensions: 46.5 x 22 x 18

KDR-88D-DT
Description: Optional Dust Tray for KDR-88D
Dimensions: 1 set is 2 ea.

Structures

Two Seas Universal Mounting Structures provide powerful support to protect your PV module investment. Models are available for Ground/Roof, Side-of-Pole, Top-of-Pole, and RV installations.

• 5052-H32 aluminum construction

• Stainless steel fasteners

• Withstands 50 psf (125 mph wind loads)

• High-tensile strength

• Corrosion resistant

• Attractive brushed aluminum finish

• Zinc-plated (galvanized) steel pole bracket, tilt plate, and cross-rail

• Universal design - models to hold from 1-20 modules

• Infinitely adjustable between 15-75 degrees

• Precision hole positioning and alignment

• Easy, rapid assembly

• Well-illustrated instructions
   
   

• Options

  • Powder coating

  • Anodizing

  • Marine-grade finish

  • Tamper-resistant hardware