LA302-DC
Item no.: 36978
Manufactured by OkSolar
Estimated Lead Time: *

U.S.: In Stock
Europe: In Stock
OkSolar.com Approved
Official Spec Sheet ✔
Direct or nearby lightning strikes can wreak havoc on a photovoltaic system by subjecting the system components and wiring to an extremely fast rise in voltage and inrush of current.While no lightning protection system is foolproof (especially in the case of a direct strike), properly grounding your system and installing transient suppression devices, such as silicon oxide varistors (SOVs) on the incoming AC and DC wiring will certainly help. SOVs are typically wired between three conductors (DC: positive, negative and ground, AC: hot, neutral and ground) and will shunt excess voltage to ground.

Solar Surge Protective Device Lighting Arrestor.

Protect your system from lightning strikes with the Solar Surge Protective Device (SPD). Designed for both AC and DC solar electric systems, it provides protection to service panels, load centers, or where the surge protector is directly connected.

Designed for both indoor and outdoor use, the SPD is offered in three different voltages--115, 300 and 600 volts. Protection is achieved by reducing the clamping voltage to a safe level that your system can sustain and that won't damage electronic components.


Solar Surge Protective Device Lighting Arrestor, Type 2 device, designed
for indoor and outdoor applications. Engineered for both AC and DC electric systems, it
protects both transformer and transformer-less inverters without interfering with the GFP
protection circuit, it provides protection to service panels, load centers or where the SPD is
directly connected to the electronic device requiring protection. Maximum protection will
only be achieved if the SPD is properly installed.


—————————>
Since these units are custom made, internal and external distribution of components may vary. Pictures are provided to help visualize the final product, but the final product may vary. We will work with your technical department to provide cutting edge technology with the latest technical components.

Type 2 device, designed for indoor and outdoor applications. Engineered for both AC and DC electric systems, it protects both transformer and transformer-less inverters without interfering with the GFP protection circuit, it provides protection to service panels, load centers or where the SPD is directly connected to the electronic device requiring protection. Maximum protection will only be achieved if the SPD is properly installed.


Solar Surge Protective Device Lighting Arrestor, Type 2 device, designed
for indoor and outdoor applications. Engineered for both AC and DC electric systems, it
protects both transformer and transformer-less inverters without interfering with the GFP
protection circuit, it provides protection to service panels, load centers or where the SPD is
directly connected to the electronic device requiring protection. Maximum protection will
only be achieved if the SPD is properly installed.


Square D by Schneider Electric HEPD80 Home Electronics Protective Device


Solar Surge Protective Device Lighting Arrestor, Type 2 device, designed
for indoor and outdoor applications. Engineered for both AC and DC electric systems, it
protects both transformer and transformer-less inverters without interfering with the GFP
protection circuit, it provides protection to service panels, load centers or where the SPD is
directly connected to the electronic device requiring protection. Maximum protection will
only be achieved if the SPD is properly installed.



Solar Surge Protective Device Lighting Arrestor, Type 2 device, designed
for indoor and outdoor applications. Engineered for both AC and DC electric systems, it
protects both transformer and transformer-less inverters without interfering with the GFP
protection circuit, it provides protection to service panels, load centers or where the SPD is
directly connected to the electronic device requiring protection. Maximum protection will
only be achieved if the SPD is properly installed.



Solar Surge Protective Device Lighting Arrestor, Type 2 device, designed
for indoor and outdoor applications. Engineered for both AC and DC electric systems, it
protects both transformer and transformer-less inverters without interfering with the GFP
protection circuit, it provides protection to service panels, load centers or where the SPD is
directly connected to the electronic device requiring protection. Maximum protection will
only be achieved if the SPD is properly installed.



Telescopic Mast Pole Solar Surge Protective Device Lighting Arrestor, Type 2 device, designed
for indoor and outdoor applications. Engineered for both AC and DC electric systems, it
protects both transformer and transformer-less inverters without interfering with the GFP
protection circuit, it provides protection to service panels, load centers or where the SPD is
directly connected to the electronic device requiring protection. Maximum protection will
only be achieved if the SPD is properly installed.


Dimensions and Weight
Length: 2 in.
Width: 2 in.
Height: 2 in.
Shipping Weight: 3 lbs.