Sensor IR Proximity Counter
Battery Operated IR Sensor with an Integrated RF Transmitter
Main Features
IR transmitter/receiver with integrated radio
Battery operated for a truly wireless installation
Front or Side Firing IR Beam
Radio interface operates with all Point Six Receivers
Unique serial number embedded in radio data packets
Up to 7 Ft. IR range
Up to 600 Ft. radio range
Can be used for overhead counting
Counts beam reflections and total beam reflection duration
CRC-16 error checked radio data packets
1.3” X 2.1” X .6” ABS enclosure
Energy managed for long battery life
Complies with part 15 of the FCC rules
Patent pending
User replaceable battery
Description:
The Point Sensor IR Proximity Counter is a battery operated infrared
beam reflection sensor with a 418 MHz radio transmitter. The sensor
consists of an IR transmitter and an IR receiver. The Point Sensor
IR Proximity Counter has a radio transmitter for truly wireless
installation and operation. The IR transmitter produces 16 pulses of
IR each second that can be reflected at distances up to 7 feet. The
IR transmitter flashes 16 pulses of high intensity IR each second.
The nature of these IR pulses is such that the IR receiver can
distinguish them from any other source of IR. This characteristic
allows the IR sensor to operate in almost any environment without
interference from ambient lighting. The Point Sensor IR Proximity
Counter is designed to require very little energy; the internal 3.6
Volt Lithium battery will operate the IR receiver for up to 1 year
in normal operation.
The Point Sensor IR Proximity Counter can be placed in a Shipping
Mode to lower energy usage and to prevent Radio transmissions during
shipping. Holding the pushbutton down for a period of time greater
than 10 seconds and then releasing will enter Shipping Mode. When
shipped from the manufacturer the IR counter will always be in
Shipping Mode.
Shipping mode is terminated by entry into Online Mode. Online mode
is entered from Shipping Mode by pushing and holding the pushbutton
for greater than 4 seconds and less than 8 seconds.
The internal 24-bit counters will perform a Counter Reset each time
the push button on the IR receiver is pushed and held for more than
4 seconds.
The Point Sensor IR Proximity Counter has dip switches that set the
infrared reflection range from 4 feet to 7 feet. The infrared range
will affect the life of the internal battery.
|
Technical Features:
|
PARAMETER |
MIN |
TYP |
MAX |
UNITS |
|
Battery Life |
0.5 |
- |
1 |
Years |
|
Battery type; Tadiran TL-2100 |
- |
- |
- |
- |
|
IR range |
4 |
- |
7 |
feet |
|
Radio range |
- |
600 |
- |
feet |
|
Proximity Counter pushbutton to reset
time |
4 |
- |
8 |
seconds |
|
Proximity Counter pushbutton to ship mode |
8 |
- |
- |
seconds |
|
Enclosure 1.3”X2.1”X.6” ABS Plastic |
- |
- |
- |
- |
|
|
|
IQUPS If you are a systems integrator, installer, engineering procurement contractor or an electrical contractor
We will work with you to design a Solar - Fuel Cell and or Wind power system for your project some applications Business - On-Grid Commercial Buildings and Off-Grid Industrial Remote electricity anytime anywhere!.
Businesses - Government Agencies and homeowners around the world are using OkSolar systems Integrated systems Solar, fuel Cells and wind energy.
Applications:
Commercial - Industrial - Disaster Relief - Military and Residential AirportIQ UPS Airfield Power Backup Electrical
Communication infrastructure(Local and Federal Government)
Base Stations for Mobil Networks that can run on Solar, Wind and Fuel Cells.IQ UPS Base stations cut diesel usage by 75 percent. IQUPS.com has designed a base station for mobile networks that would run on sun, wind power and fuel cells. Gas Stations (Powering gasoline pumps during a power failure).
Hospital EMS: IQ UPS Hospital Power Backup Electrical ( Emergency Power Back-up for Hospitals ).
Rail Roads: Railroad crossing signals backup.
Traffic intersections: backup power for critical LED traffic light intersections.
Solar Trees Arrays We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: Shading vehicles from the sun and at the same time generate Green energy. Facilitate the creation of infrastructure for electric vehicles.
Traffic Application:
-Keeping Traffic Moving When The Power Goes Out Item#1608450 Portable Solar Powered 120 volts 60Hz. or 230 Volts 50 Hz, Portable Solar Powered 220 Volts 50 Hz, Portable Solar Powered 230V 50Hz, Portable Solar Powered 220Volts 50Hz pedestrian signals, A 120 or 240 V, 100 amp, single-phase IQUPS.com transfer panel is used to activate the generator at the loss of power. According to IQUPS, the generator assumes the full load in seven seconds. When utility power is restored, the generator shuts off and signal operation is automatically returned to the normal power source. "The IQUPS1800 will completely run the intersection stoplights," said general manager for the DOT. "Other backup systems will put the lights to flashing red. When the generator kicks in on the IQUPS1800, the lights will fully function for 25 to 40 hours, depending on the load at the intersection. When power is restored, the system returns to utility power and the traffic signals do not need to be reset." Battery Backups Prevent Accidents at Critical Traffic Signals Additional Applications Being Taken for More Intersections Keeping Traffic Moving When The Power Goes Out Portable Solar Power 120 Volts 60 Hz or 230 Volts 50Hz, Traffic Portable Solar Power 120 Volts 60 Hz Thanks to new IQTraffiControl.com energy-efficiency technology, different Cities, towns and counties will keep their traffic signals safely operating even if the electricity goes out, and other local governments. Intersections have been converted to new LED signal lights utilizing more efficient, LED (light emitting diode) lamps. The new lamps cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Because LEDs use so much less electricity, it is now technically possible to provide battery backup power to alike. We also Have Fuel Cells Traffic Backups.
IQ UPS Traffic Back-up Standby Power Generation.
- Battery backup systems for LED traffic Signs -
IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With battery backup 3 power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.
OkSolar.com Affiliate
Sample Ready to ship unit
