A removable front opening door is lined with a sealing gasket and includes a special keyed cam-lock and dust cover.

These enclosures are white powder coated aluminum for ultimate protection in severe climates. For applications in extreme hot or cold conditions, space is available for additional 1� foam insulation around the battery.

Features:

• 3 models for either 1, 2 or 4 batteries (125 Ah)
• Vertical design on 4 battery enclosure (2 + 2) with removable interior shelf
• Passive venting with dust filtration pads
• 1/4 turn cam-locking door latches with special key and dust cover
• Electrical knockouts and ground lug hole on rear
• Rear-top of enclosure �hanger� built in for easy installation onto mounting brackets
• Vandal resistant mounting brackets and U-bolt sets are sold separately

Matching white power coat finish aluminum channels are used for
wall or pole mounting. Slotted pattern allows U-bolt sizes from 2�
to 8� (schedule 40 pipe) or larger band clamps. Brackets are first
mounted in place on wall or pole. Enclosure is then hung in place
on top bracket and bolted through lower bracket to secure �carriage-bolts� for vandal resistance.
 

All OK series enclosures include interior studs for mounting of �Rear� and �Right-Side� back panels and
an interior door panel.

Back panels are made of 0.080� brushed aluminum with four mounting holes.

Right-side and door panels are blank, rear panels are either blank or with 39 pre-located holes for #8
self tapping screws, allowing simple attachment of most commonly used PV controllers, breakers, terminal strips, surge arrestors, and ballasts.

Top Opening Enclosure Mounting Panels
Blank panels are 0.125� brushed aluminum with four mounting holes for side and top cover
locations to allow attachment of OEM controllers and other components. Side panel fits all chest sizes. Top panel fits both 6 x 4D & 6 x 8D enclosures.