USF-32, USF-11, USF-5, Flexible Solar Battery Chargers, flx-5,
flx-11, flx36, solar panels, flexible solar panels, flexible solar
chargers
Uni-solar Flexible (USF) Unbreakable Solar Panels 5, 11, 32 Watts –
Triple Junction
https://www.oksolar.com/lionsearch.asp
Item# 15670 - 15672 - 15674
Flexible Solar Battery Chargers
Each UNI-SOLAR battery charger incorporates the same Triple Junction
solar cell technology as the Uni-Power module. The flexible modules are
exceptionally durable and are encapsulated in EVA and bonded and stitched
to a cushioned, vinyl and foam backing material. The modules feature a
clear Tefzel® front covering. Bypass diodes are connected across each
cell, allowing the modules (excluding FLX-5) to produce power even when
partially shaded. Blocking diodes are included in a small sealed junction
box located at the top of the module. Each panel has 8 feet of cable with
2-pin SAE connector, and is packaged with a 2-foot fused battery cable.
These modules carry a three-year limited warranty and are UL listed.
These accessories are professional
marine-grade components with connectors
that match the PowerFilm® Foldable and
Rollable Series output cord.
Ultra compact and ultra lightweight, the
PowerFilm® AA Foldable Solar Charger is
ideal for soldiers in the field. The
charger provides portable power for
charging AA rechargeable batteries. Once
unfolded, this charger automatically
begins charging. The charging lights
confirm if the batteries are charging or
fully charged. The specialized charging
circuitry provides highly effective
battery charging..
Applicationss
Recharge 2 or 4 AA rechargeable (NiMH or
NiCad) batteries to provide power for
any device that uses AA batteries..
Benefits::
• Provides lightweight on-soldier power..
• Reduces need for extra batteries..
• Supports rapid deployment and remote
locations with quick solar electric
power generation..
• Provides power for emergency needs..
• Tops off batteries to produce maximum
run time..
• Highly effective battery charging with
breakthrough charging circuitry..
Beatures::
• 2 Batteries : Full charge in about 4
hours of full sun..
• 4 Batteries : Full charge in about 8
hours of full sun..
• Integrates lightweight, rugged
PowerFilm® flexible solar panels
directly with fabric..
• Charging lights confirm if batteries
are charging or fully charged..
• Rugged construction with 6 grommets
for easy attachment..
• Charger adds less weight than carrying
4 extra batteries..
• 1 year warranty (see website for
details)..
• Patent applied for..
• CAUTION: Never charge Alkaline
batteries, they could leak and become
dangerouss
Information in PDF formatt
Military and Energencyy
Through various endeavors and
contracts with the military a group of
products were produced with the military
and strategic partners. These products
are made to fit the military’s needs and
specifications. Consumer versions of
some products are in production and
available for purchase through PowerFilm
or our strategic partners.
Rollable Solar Panels
Power Film® integrated solar panels
(thin film on plastic) are developed and
manufactured with a proprietary roll
process by PowerFilm Incorporated, they
are truly rollable unlike other thin
film technologies that are only somewhat
flexible. PowerFilm® solar panels are
all monolithically integrated which
eliminates the damage-prone manual
connections of individual solar cells.
PowerFilm® is made of silicon, a natural
resource in abundant supply. PowerFilm®
is Cadmium Free, unlike some other solar
technologies, and performs well in
diverse environments, including hot sun,
and does not suffer from wasted
over-voltage..
PowerFilm® products are ultra rollable
because they are manufactured on a roll
up to 2400 feet long, using the
proprietary roll-to-roll manufacturing
technology platform of PowerFilm
Incorporated. PowerFilm Incorporated is
the first and only company in the world
to sell solar products manufactured on a
true roll-to-roll process using a
plastic substrate..
PowerFilm® products are monolithically
integrated which eliminates the
damage-prone manual connections of
individual solar cells. PowerFilm®
products are constructed using a durable
polymer (plastic) substrate..
Several features enable easy
integration: Paper thin low profile;
Ultra flexibility allows conformity to
shapes; Complete product design
eliminates need for unsightly bolt-on
frames..
Integrated with a fabric backing for
enhanced product functionality..
Constructed using a proprietary
combination of thin and lightweight
materials..
Cadmium Free! (Other solar technologies
such as CIS, CIGS, and CdTe contain
cadmium which is considered an extremely
toxic metal by the Department of Labor.)
If comparing products, check to be sure
they are Cadmium Free. Primary element
used in PowerFilm® is silicon, a natural
resource in abundant supply.
Solar Battery chargers foldable
Solar battery Charger
extremely rugged and
easy to carry and deploy
OkSolar military power requirements. The
overall benefits of our military solar
power products are to, enable extended
missions, improve logistics by enabling
field charging thereby reducing the
number of batteries in the field and
provide a significant cost reduction
when compared to primary batteries.
OkGlobal Solar Energy, Inc.
manufactures the highest performance
thin film solar cell products in the
world. Based on advanced NASA &
Department of Energy Technologies,
OkGlobal Solar products are lightweight,
portable, & rugged enabling new &
innovative commercial consumer,
military, & industrial applications. Our
vision is to bring solar to each and
every facet of life…to your home….to
you….to your national security.
military power requirements. The overall
benefits of our military solar power
products are to, enable extended
missions, improve logistics by enabling
field charging thereby reducing the
number of batteries in the field and
provide a significant cost reduction
when compared to primary batteries.
Included connection Kit
Ballistic Protection:
Stop this from
happening at once! Item#54780
-
Ballistic Protection - Bullet Proof Shields
-
This patented* shield incorporates leading edge
technology to provide maximum ballistics resistance.
-
The shield is primarily constructed of dual layer
polycarbonate sheets which are UV stabilized.
-
Designed to stop small arms fire .22 to .44 caliber
Our Systems use State of the Art Plug and Play
V 7.07D
Features:
More Information PDF ->
-
Module Ratings -- 32, 11, 5 Watts
-
Polymer Laminated
-
Weather-Resistant
-
Three-Year Limited Warranty
-
Blocking Diodes for Battery Protection
Applications:
-
Marine Use
- Battery Maintenance
- Recreational Vehicles
- Camping
- Hiking
The
vinyl and foam modules are exceptionally
durable. They are encapsulated in UV stabilized polmers and bonded and
stitched to a cushioned backing material. The polymer encapsulation
includes EVA and fluoropolymer Tefzel, a DuPont film similar to Teflon.
Bypass diodes are connected across each cell, allowing the modules
(excluding the USF-5) to produce power even when partially shaded.
UNI-SOLAR FLEXIBLE (USF) UNBREAKABLE POWER
MODULES 5, 11 AND 32 WATTS - TRIPLE JUNCTION
For one-module marine and RV battery charging
applications. Same Triple Junction technology as US modules but in a
“soft”, flexible format. Eight feet of tinned lead wire output cable with
2-pin waterproof SAE connector package with 2 foot fused battery cable.
Three sizes: 5, 11 and 32 watts. Includes a bypass diode on each cell and
blocking diode in output cable. 3 year limited warranty.
Uni-Solar (US) Triple Junction Silicon Modules
Breakthrough technology at affordable prices! The heart of the US series
modules is the, Triple Junction silicon solar cell unique to Untied Solar.
Each cell is composed of three semiconductor junctions stacked on top
of each other. The
bottom cell absorbs the red light the middle cell absorbs the green
light and the top+ cell absorbs the blue light This septum splitting
capability is the key to higher efficiency. Uni-Solar modules have
demonstrated in repeated test situations that they deliver more amps per
rated watt – Smart Watts in most conditions, than any commercially
available solar module!
The US series modules me exceptional/y durable. The Triple Junction
cells are made by depositing the active silicon material on unbreakable
stainless steel sheet metal. A steel back plate provides stiffness and the
modules are encapsulated in UV stabilized polymers and framed in anodized
aluminum. No glass is used. Bypass diodes ore connected across each cell,
enabling the modules to produce power even when partially shaded. The
US64, 42 and 32 come equipped with (I conduit ready, weather proof
junction box. The US2 I, I 5, 3 and I come with on eight-foot cable.
The US series Triple Junction silicon modules are everything that you
have wonted in (1 solar electric module: UNBREAKABLE EFFICIENT SHADOW
PROTECTED AND LOW COST UL and CUL listed, NEW 20 year warranty.
You
may need Adobe Acrobat Reader to open some files. You can get this
application for free at
1, <meta name="Categories"
content="Home, Business and Economy, Business to Business, Energy,
Renewable, Solar">, 8
|