Iota
Engineering DLS Series Power Converters
Replaces Todd Engineering and similar converters.
Using state-of-the-art, switch-mode technology, the DLS Power Supply series is
engineered with the user and variable environmental conditions in mind. Extra
care has been given to insure many years of service-free operation, even when
subjected to extremely harsh conditions. Batteries are charged quickly and
efficiently without over charging and pumps, motors, and fans operate perfectly
for prolonged life.
IOTA Engineering uses advanced switch mode technology to bring to market
highly sophisticated electronic converter/power supplies at appealing
affordability.
Exceptionally clean DC output insures pumps, motors, fans, and lights work
perfectly. This means longer life for any connected load; virtually no AC ripple
to cause static or premature failure of radio or television equipment.
- DLS 90
- DLS 75
- DLS 55
- DLS 45
- DLS 30
- DLS 15
- 24-48 Volts
- IQ4
IQUPS If you are a systems integrator, installer, engineering procurement contractor or an electrical contractor
We will work with you to design a Solar - Fuel Cell and or Wind power system for your project some applications Business - On-Grid Commercial Buildings and Off-Grid Industrial Remote electricity anytime anywhere!.
Businesses - Government Agencies and homeowners around the world are using OkSolar systems Integrated systems Solar, fuel Cells and wind energy.
Applications:
Commercial - Industrial - Disaster Relief - Military and Residential AirportIQ UPS Airfield Power Backup Electrical
Communication infrastructure(Local and Federal Government)
Base Stations for Mobil Networks that can run on Solar, Wind and Fuel Cells.IQ UPS Base stations cut diesel usage by 75 percent. IQUPS.com has designed a base station for mobile networks that would run on sun, wind power and fuel cells. Gas Stations (Powering gasoline pumps during a power failure).
Hospital EMS: IQ UPS Hospital Power Backup Electrical ( Emergency Power Back-up for Hospitals ).
Rail Roads: Railroad crossing signals backup.
Traffic intersections: backup power for critical LED traffic light intersections.
Solar Trees Arrays We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: Shading vehicles from the sun and at the same time generate Green energy. Facilitate the creation of infrastructure for electric vehicles.
Traffic Application:
-Keeping Traffic Moving When The Power Goes Out Item#1608450 Portable Solar Powered 120 volts 60Hz. or 230 Volts 50 Hz, Portable Solar Powered 220 Volts 50 Hz, Portable Solar Powered 230V 50Hz, Portable Solar Powered 220Volts 50Hz pedestrian signals, A 120 or 240 V, 100 amp, single-phase IQUPS.com transfer panel is used to activate the generator at the loss of power. According to IQUPS, the generator assumes the full load in seven seconds. When utility power is restored, the generator shuts off and signal operation is automatically returned to the normal power source. "The IQUPS1800 will completely run the intersection stoplights," said general manager for the DOT. "Other backup systems will put the lights to flashing red. When the generator kicks in on the IQUPS1800, the lights will fully function for 25 to 40 hours, depending on the load at the intersection. When power is restored, the system returns to utility power and the traffic signals do not need to be reset." Battery Backups Prevent Accidents at Critical Traffic Signals Additional Applications Being Taken for More Intersections Keeping Traffic Moving When The Power Goes Out Portable Solar Power 120 Volts 60 Hz or 230 Volts 50Hz, Traffic Portable Solar Power 120 Volts 60 Hz Thanks to new IQTraffiControl.com energy-efficiency technology, different Cities, towns and counties will keep their traffic signals safely operating even if the electricity goes out, and other local governments. Intersections have been converted to new LED signal lights utilizing more efficient, LED (light emitting diode) lamps. The new lamps cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Because LEDs use so much less electricity, it is now technically possible to provide battery backup power to alike. We also Have Fuel Cells Traffic Backups.
IQ UPS Traffic Back-up Standby Power Generation.
- Battery backup systems for LED traffic Signs -
IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With battery backup 3 power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.
OkSolar.com Affiliate
Sample Ready to ship unit
The DLS series converter/charger quickly and
efficiently charges batteries from the full rated
output of the DLS. The DLS then maintains the
batteries, only putting into the battery what is
required by load or self discharge, cutting back to
milliamps as the battery requires.
Low and transient AC line voltage is a major cause of
converter/power supply failure. The DLS series
converter/power supply is protected against low line
voltage, as well as spikes coming from the AC power
source or from improperly adjusted generators.
The DLS series converter/power supply meets F.C.C.
criteria, minimizing radio and television equipment
interference, especially on the lower frequency bands.
The DLS series converter/power supply can be used with
or without a battery. When used as a converter/power
supply, the DLS model will only supply what is
required by the load. When not in use it is
essentially off, reducing electricity usage.
Even in its subcompact size, the DLS series
converter/power supply, at full load, has an operating
temperature half that of some switch mode electronic
models. This means substantially longer life and safer
operation.
Tight line-load regulation ensures that the output
voltage holds steady from no load to full load. This
keeps pumps, motors, and lights working at the correct
voltage even during brown out situations.
Proportional Fan Circuitry provides an extra measure
of protection. During times of heavy load demands, the
automatic circuitry will activate the fan before
thermal stress can occur on any internal components.
Reliability and durability is built into all DLS
models.
In the event the batteries or the DLS unit is wired
incorrectly, the DLS converter/power supply is
protected from damage. External fuses can be quickly
and easily replaced.
Iota DLS55
battery charger, Iota DLS30 battery charger
IOTA Engineering IQ Smart Controller
The IQ Smart Controller offers automatic charging control for the DLS power
converters/chargers to provide longer and safer use of your system's battery.
The IQ Controller is compatible with any DLS model, and is covered under
Two-Year Warranty. The IQ Controller allows the DLS charger to operate as an
automatic 3-stage "smart charger". This gives the benefit of Bulk, Absorption,
and Float stage charging, increasing the charging capacity of the DLS charger
and decreasing charge times, insuring proper and safe battery charging and
minimizing over-charging. This "smart" technology monitors the battery at all
times. If the DLS voltage remains in the long term float stage for more than 7
days, the IQwill automatically deliver a boost charge for a predetermined time,
then automatically return to the normal float stage. DLS power converters can be
ordered with the IQ Controller option internally integrated into the unit.
Bulk Charge
The batteries are charged from the full rated output
of the DLS charger. During this stage, the batteries
are recharged quickly to reduce charge times.
Absorption Charge
The batteries are then held in the absorption stage
for a controlled period, insuring a full and complete
charge. During this stage, the battery cells are
equalized to 14.2vdc (for 12V systems) for increased
capacity.
Float Charge
During the float stage, the DLS charge voltage is
reduced. This minimizes gassing, while maintaining a
full charge. If the battery voltage drops below
12.6vdc (for 12V systems), the IQ Controller will
restart at the bulk charge stage and repeat this
cycle.
Weekly Equalization
If the batteries have not received a "smart charge"
during a 7 day period, the IQ Controller will switch
the DLS charger into a pre-programmed, equalization
stage to top off the batteries. This ensures full
batteries all of the time without over-charging.
Iota Battery Chargers, Battery Chargers, iota, IOTA, battery charger iota,
Inverters, Inverter/Chargers, Smart Battery Chargers, Emergency Backup Power,
Tripp-Lite, tripplite, tripp lite, exceltech, iota, Outback, Inverters, Vanner,
Sunny Boy, trace, xantrex, AC Inverters and Accessories DLS 90, DLS 75, DLS 55,
DLS 45, DLS 30, DLS 15, 24-48 Volts, iota dsl90, iota dsl75, iota dsl55, iota
dsl45, iota dsl 30, iota dsl15!
|
