The Carlson Wideband CDMA Spread Spectrum Phone Line Extender Features:


SPECIFICATIONS
• 2 Point-to-Point Full-Service Telephone Lines, Both Useable for Voice or Data
• Add a 128 kbps, V.35 Data Port with Model T-PE256V.35
• Plug-and-Play Simplicity - Simple to Install, Easy to Use
• 2.4 GHz, All-Digital, CDMA Spread Spectrum Radio Technology
• Up to 22 km Line-of-Sight Range with Internal Antenna; Up to 80 km Range with Optional External Antenna
• Lightweight, Weatherproof, Portable, Redeployable, Low-Maintenance
• Low Power Draw, Solar Powerable
Model T-PE


Actual size only
22 x 27 x 13 cm
(8.5 x 10.5 x 5 inches)




The all-digital i-WLL Trailblazer Phone Line Extender is a fixed point-to-point WLL (wireless local loop) telephone system that delivers two full-service telephone lines to rural and remote areas where wireline costs are prohibitive.

The i-WLL breakthrough provides both crystal-clear voice and wireline-quality dial-up modem data rates at distances up to 22 km/14 miles line of sight - or up to 80 km/50 miles with an optional external antenna. Both lines can be used for either voice or data.

Wireline-Quality Voice & Data
Using uncompressed 64 kbps channels, the Trailblazer Phone Line Extender delivers high-quality voice plus full fax and dial-up modem compatibility.

Plug-and-Play Simplicity
All components, including antenna, are fully integrated into a NEMA 4X weatherproof housing. Small, lightweight and easy to install.

No License Needed
Uses the license-exempt 2.4 GHz ISM frequency band. (License-free in most but not all countries.)

No Tuning
Self-configuring, time division duplexing system simplifies installation and greatly reduces the need for maintenance and service. Subband also selectable by manual override with rotary switch.

Complete Privacy
Fully encrypted, spread-spectrum CDMA modulation assures privacy.

Low, Versatile Power Draw
Uses only 2 to 4 watts of power and accepts any voltage from 12 to 48 DC.

Solar-Powered Repeater
An all-digital repeater is available that extends the range with no signal loss.

Additional Uses
The primary i-WLL Trailblazer application is connecting rural and remote homes, businesses, farms and industrial sites to the global telephone network. Additionally, the i-WLL Trailblazer can be deployed for many other uses, including:

Any number of unique places where a copper telephone line cannot be readily or cost-effectively extended.
Emergency and disaster relief
Initial build-outs for new construction
Telemetry for remote data collection

IQUPS If you are a systems integrator, installer, engineering procurement contractor or an electrical contractor

We will work with you to design a Solar - Fuel Cell and or Wind power system for your project some applications Business - On-Grid Commercial Buildings and Off-Grid Industrial Remote electricity anytime anywhere!.

Businesses - Government Agencies and homeowners around the world are using OkSolar systems Integrated systems Solar, fuel Cells and wind energy.

Applications: Commercial - Industrial - Disaster Relief - Military and Residential AirportIQ UPS Airfield Power Backup Electrical

Communication infrastructure(Local and Federal Government)

Base Stations for Mobil Networks that can run on Solar, Wind and Fuel Cells.IQ UPS Base stations cut diesel usage by 75 percent. IQUPS.com has designed a base station for mobile networks that would run on sun, wind power and fuel cells. Gas Stations (Powering gasoline pumps during a power failure).

Hospital EMS: IQ UPS Hospital Power Backup Electrical ( Emergency Power Back-up for Hospitals ).

Rail Roads: Railroad crossing signals backup.

Traffic intersections: backup power for critical LED traffic light intersections.

Solar Trees Arrays We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: Shading vehicles from the sun and at the same time generate Green energy. Facilitate the creation of infrastructure for electric vehicles.

Traffic Application: -Keeping Traffic Moving When The Power Goes Out Item#1608450 Portable Solar Powered 120 volts 60Hz. or 230 Volts 50 Hz, Portable Solar Powered 220 Volts 50 Hz, Portable Solar Powered 230V 50Hz, Portable Solar Powered 220Volts 50Hz pedestrian signals, A 120 or 240 V, 100 amp, single-phase IQUPS.com transfer panel is used to activate the generator at the loss of power. According to IQUPS, the generator assumes the full load in seven seconds. When utility power is restored, the generator shuts off and signal operation is automatically returned to the normal power source. "The IQUPS1800 will completely run the intersection stoplights," said general manager for the DOT. "Other backup systems will put the lights to flashing red. When the generator kicks in on the IQUPS1800, the lights will fully function for 25 to 40 hours, depending on the load at the intersection. When power is restored, the system returns to utility power and the traffic signals do not need to be reset." Battery Backups Prevent Accidents at Critical Traffic Signals Additional Applications Being Taken for More Intersections Keeping Traffic Moving When The Power Goes Out Portable Solar Power 120 Volts 60 Hz or 230 Volts 50Hz, Traffic Portable Solar Power 120 Volts 60 Hz Thanks to new IQTraffiControl.com energy-efficiency technology, different Cities, towns and counties will keep their traffic signals safely operating even if the electricity goes out, and other local governments. Intersections have been converted to new LED signal lights utilizing more efficient, LED (light emitting diode) lamps. The new lamps cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Because LEDs use so much less electricity, it is now technically possible to provide battery backup power to alike. We also Have Fuel Cells Traffic Backups.

IQ UPS Traffic Back-up Standby Power Generation. - Battery backup systems for LED traffic Signs -

IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With battery backup 3 power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.

Sample Ready to ship unit

1, Manufacturer and distributor of Wireless Phone Line Extender for Rural Telephony,