Gate Openers by OkSolar gates that open by 120VAC
or Solar Energy! garage door opener, gate, gate
opener, safety gate, security gate, gate fence,
driveway gate, electric gate, automatic gate,
automatic gate opener, gate operator, electric gate
opener
Mega Arm Gate
Opener,
NEXT GENERATION PARKING GATE WITH INHERENT BACKUP
POWER
We provide Commercial duty parking gate operator,
Gate, operators, gate operators, access, access
control, arm, parking, parking arm gate, slide gate
operators, parking gates, barrier gates ,arm gates,
barrier, slide, slide gates, swing, revenue swing
gates, swing gate operators, revenue control, swing
gates, commercial, industrial, security gates, radio
transmitters
The
MEGA ARM by
DC SOLUTIONS, INC. was made to be unique in the
industry through innovative design and solid
engineering. Its single State of the Art universal
electronics control board eliminates the need for
mechanical limit switches, relays and contactors. Arm
position is limited by a magnet mounted on the drive
shaft which is sensed by two magnetic sensors on the
electronics controller. Its full service controller is
capable of accepting inputs from telephone entry, loop
detectors, card readers, push buttons, barcode
scanners, and is equipped with multiple vehicle memory
buffer. Built in regulated 24VDC backed up power
provided for accessories (detectors, receivers, card
readers). The standard break away arm design can allow
the arm to be reused many times. Finally, its modern
design and cutting edge technology will make the MEGA
ARM the perfect choice for all your parking control
applications.
Gate Openers by OkSolar gates that open by
Solar Energy!garage door opener, gate, gate
opener, safety gate, security gate, gate fence,
driveway gate, electric gate, automatic gate,
automatic gate opener, gate operator, electric
gate opener
|
UNIT OVERVIEW
The
DC SOLUTIONS model MEGA-ARM barrier style parking
gate operator is unique in the industry. Setting
the MEGA-ARM apart are many features that make it
the front runner in its class. With standard
features like:
-
Built in battery backup - inherent 24 VDC
backup power with regulated 24VDC for
accessories.
-
High torque 24 volt Permanent Magnet DC
motor.
-
Full service controller with eight inputs
and LED indicators for loops, card reader,
radio, etc...
-
Continuous duty operation for all
applications (even during power failures).
-
Reversible arm direction for right or left
handed operation.
-
Instant Reverse Device (IRD) monitor senses
obstructions going open and close.
-
Automatic open of gate arm when power is
lost if desired (With 15 sec. delay
selection).
-
Raise gate input memory will memorize
multiple vehicles-ideal for barcode scanners
& AVI.
-
Ability to have arm STOP in close travel if
tailgating is sensed at close loop.
-
Break away mounting design for the 12 - 15
ft. X 3" tubular aluminum arm.
-
All rust proof aluminum construction with
powder coat baked on enamel.
-
Molded Polyethylene UV stabilized cover
never needs wax or paint (white or colors).
-
Direct drive gear reducer eliminates many
parts that might otherwise fail.
-
Microprocessor (RISC) based electronics with
watch dog reset timer.
-
State of the art MOSFET motor drive
technology, NO contactors or relays.
-
Dynamic motor braking to preserve arm
positioning.
-
Soft start and stop in open and close travel
motions.
-
No limit switches to fail-uses magnetic
(Hall Effect) sensors to monitor arm
position.
-
Maximum Run Timer for motor (MRT) with
anti-tamper protection in closing direction.
-
Each unit configurable as master or slave
operator.
-
Safe 24 VDC low voltage motor and control
wiring.
-
Open architecture PCB with space for
OVERDRIVE CPU for future expanded options.
-
LED diagnostic center for easy on-site
trouble shooting.
-
Closing timer adjustable from 1-33 seconds
with on / off selection.
-
Transorb diodes on all inputs for protection
against transient voltage spikes.
-
Capable of being powered by 120 VAC, 220 VAC
or Solar power, standard.
-
U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
-
5 year perforation warranty on cover and
chassis with 1 year on electronics and
mechanism.
-
Interlock with memory when connected to a
slide/swing gate operator, barrier will wait to
raise until that unit reaches its full open
position. Barrier will not raise if slide/swing
gate is tampered with.
-
Tail gate alarm-K1 relay can be programmed to
fire when a tail gater is sensed on the close
loop.
|
Power Requirements
|
Voltage: |
120 or 220V AC, Solar panel
|
Frequency: |
50 or 60Hz
|
Amp Draw: |
2 Amperes Nominal
|
Backup Power: |
Requires
(2) 7 Amp Hour 12 Volt DC (Yuasa NP7-12 or
Equivalent)
|
Enclosure
|
Chassis:
|
1/4" Heavy Duty Rust Proof T-6 Aluminum
Construction
|
Cover:
|
Removable Heavy Duty Molded U.V. Stable
Polyethylene (White Standard, Colors Optional)
Meets UL-746C, 94-5VO
|
Finish:
|
Polyester Polyurethane Baked On Power Coat (White
Standard)
|
Weight:
|
105 lb (Without Arm)
|
Barrier Arm (Boom)
|
Operation:
|
Breakaway Design - Reusable Arm Attaches With
Nylon Nuts
|
Lengths:
|
3" O.D. Round Extruded Aluminum
12', 15' Available With Or Without Yellow/Black
Stripes (15' Requires Internal Counter Weight)
4" O.D. Soft Padded Arm - Yellow Padded Sleeve
(Uses 2" O.D. Tube)
12', 14' (Both Require Adaptor Collars)
|
Material:
|
3" O.D. Extruded Aluminum
|
Finish:
|
White Polyester Polyurethane Baked On Powder Coat
|
Drive Assembly
|
Motor:
|
High Torque 1/3 HP 24 VDC Permanent Magnet (TENV)
- With Permanently Sealed Bearings
|
Transmission:
|
60:1 Heavy Duty Gear Reducer
|
Arm Travel:
|
89 Degrees Approximately
|
Raise/Lower:
|
2.5 Seconds Approximately
|
Mechanism:
|
Direct Drive - No Crank Arms Or Rubber Bumpers
|
Electronic Controller
|
Technology:
|
Micro Controller Based (RISC)
|
Surge Protection:
|
All Inputs Protected By Ultra Fast Transorb Surge
Arrestors
|
Isolated Inputs:
|
Opto Isolated - Open, Close, Free Exit, Safety,
Shadow, Aux Open Has Memory/Non-Memory
|
Outputs:
|
K1 Relay (Option), 24 VDC Regulated Accessory
Power (500MA)
|
Terminals:
|
One 12 Pin Removable, Three 4 Pin Removable
|
Timers:
|
Select On/Off With 1 - 33 Seconds Via DIP Switch
Selection
|
Position Sensing:
|
Magnetic Hall Effect Sensors - No Mechanical
Roller Switches
|
Motor Drive Output:
|
State Of The Art Mosfet Motor Drive Technology
|
Compatibility(Accessories):
|
All AVI, Laser Barcode Scanners, Radio Receivers,
Card Readers, Ticket Machines, Loop Detectors,
Push Buttons, Token Machines (Note: Up To .5 Amp
(500MA) 24 VDC Backed Up Accessory Power Available
to Power Above Devices.)
|
Selections
|
Dip Selections
(Switches):
|
Aux Input Memory/Non Memory, Timer On/Off, Auto
Raise Arm If Power Fails With 15 Sec Delay/Fail
Secure - Right Hand Operation/Left Hand Operation,
Relay Pulse On OLS/Relay On Except When On CLS
|
Safety Approvals:
|
U.L. LISTED (U.S.), C-U.L. LISTED (CANADA)
|
Safety Standards:
|
UL-325 (U.S.), CSA 22.2#247 (CANADA)
|
Options
|
Relay:
|
K1 Relay With Programmable Operation
|
Heater: |
150 Watt Heater With Automatic Thermostat (For Use
In Areas Where Temperatures Fall Below 15° F)
|
Slip Clutch : |
Allows arm to be forced up without causing damage.
Gate will close after first car passes or set to
close by timer. Arm will automatically re-level
itself.
|
Cabinet:
|
Full length
rust proof aluminum tower |
- The speed from full closed to open is about 2.75
seconds on the standard model. Close is a bit faster
at about 2.5 sec.
- The 15 ft arm has a counter weight in it, so its
speeds are also about the same as well.
|
Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
Gate, operators, gate operators, access,
access control, arm, parking, parking arm gate, slide
gate operators, parking gates, barrier gates ,arm
gates, barrier, slide, slide gates, swing, revenue
swing gates, swing gate operators, revenue control,
swing gates, commercial, industrial, security gates,
radio transmitters!
|