Home
Solar Energy Systems
Don't let a power outage interrupt your work or leisure ever again. Now
you can continue working on your computer, talking on your cordless phone
or watching TV during a power outage with the new Power Pac from
Statpower. This portable, rechargeable power source allows you to power
your appliances and other electronic devices with 115 volts of AC power or
12 volts of DC power.
IQUPS If you are a systems integrator, installer, engineering procurement contractor or an electrical contractor
We will work with you to design a Solar - Fuel Cell and or Wind power system for your project some applications Business - On-Grid Commercial Buildings and Off-Grid Industrial Remote electricity anytime anywhere!.
Businesses - Government Agencies and homeowners around the world are using OkSolar systems Integrated systems Solar, fuel Cells and wind energy.
Applications:
Commercial - Industrial - Disaster Relief - Military and Residential AirportIQ UPS Airfield Power Backup Electrical
Communication infrastructure(Local and Federal Government)
Base Stations for Mobil Networks that can run on Solar, Wind and Fuel Cells.IQ UPS Base stations cut diesel usage by 75 percent. IQUPS.com has designed a base station for mobile networks that would run on sun, wind power and fuel cells. Gas Stations (Powering gasoline pumps during a power failure).
Hospital EMS: IQ UPS Hospital Power Backup Electrical ( Emergency Power Back-up for Hospitals ).
Rail Roads: Railroad crossing signals backup.
Traffic intersections: backup power for critical LED traffic light intersections.
Solar Trees Arrays We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: Shading vehicles from the sun and at the same time generate Green energy. Facilitate the creation of infrastructure for electric vehicles.
Traffic Application:
-Keeping Traffic Moving When The Power Goes Out Item#1608450 Portable Solar Powered 120 volts 60Hz. or 230 Volts 50 Hz, Portable Solar Powered 220 Volts 50 Hz, Portable Solar Powered 230V 50Hz, Portable Solar Powered 220Volts 50Hz pedestrian signals, A 120 or 240 V, 100 amp, single-phase IQUPS.com transfer panel is used to activate the generator at the loss of power. According to IQUPS, the generator assumes the full load in seven seconds. When utility power is restored, the generator shuts off and signal operation is automatically returned to the normal power source. "The IQUPS1800 will completely run the intersection stoplights," said general manager for the DOT. "Other backup systems will put the lights to flashing red. When the generator kicks in on the IQUPS1800, the lights will fully function for 25 to 40 hours, depending on the load at the intersection. When power is restored, the system returns to utility power and the traffic signals do not need to be reset." Battery Backups Prevent Accidents at Critical Traffic Signals Additional Applications Being Taken for More Intersections Keeping Traffic Moving When The Power Goes Out Portable Solar Power 120 Volts 60 Hz or 230 Volts 50Hz, Traffic Portable Solar Power 120 Volts 60 Hz Thanks to new IQTraffiControl.com energy-efficiency technology, different Cities, towns and counties will keep their traffic signals safely operating even if the electricity goes out, and other local governments. Intersections have been converted to new LED signal lights utilizing more efficient, LED (light emitting diode) lamps. The new lamps cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Because LEDs use so much less electricity, it is now technically possible to provide battery backup power to alike. We also Have Fuel Cells Traffic Backups.
IQ UPS Traffic Back-up Standby Power Generation.
- Battery backup systems for LED traffic Signs -
IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With battery backup 3 power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.
OkSolar.com Affiliate
Sample Ready to ship unit
Description
* New |
-
Ideal for powering home security systems, laptop computers,
portable stereos, cell phones and much more for up to 40 hours
-
Capable of jump-starting a car battery
-
Features dual AC outlets for powering multiple devices
-
Rechargeable with AC adapter (24 hrs)
|
Solar cells capture the sun's energy and change it to electricity. Inside
a solar panel, each cell contains silicon, an element found in sand that
absorbs sunlight. The energy in this absorbed light produces a small
electrical current. Metal grids around the solar cells direct the currents
into wires that lead to the power controls.
The
solar array is comprised of one or more solar PV modules (solar panels)
which convert sunlight into clean solar electricity. PV is short for Photo
voltaic, which means electricity from light. The solar modules need to be
mounted facing the sun and avoiding shade for best results.
The
main function of a charge controller is to prevent over charging the
batteries, as well as keeping electrical storage in the batteries from
discharging to the solar modules at night.
The
batteries store the solar power generated and discharge the power as
needed. The battery bank consists of one or more solar deep-cycle type
batteries. Depending on the current and voltages for certain applications
the batteries are wired in series and/or parallel.
The
Inverter changes the DC current stored in the batteries into usable AC
current which is the most common type used by most household appliances
and lighting.
Selecting the correct size and type of wire will enhance the performance
and reliability of your system. The size of the wire must be large enough
to carry the maximum current expected without undue voltage losses.
The
appliances and devices (such as TV's, computers, lights, water pumps etc.)
that consume electrical power are called loads.
Search Our Products Database
|