Rotating Heliport Beacon FAA Approved
Airport Rotating Beacon FAA Approved
Applications:
The Airport Rotating Beacon is used primarily for night operations at airports as an identification and location marker. The dual-light beacon (clear and aviation green lenses) features 150-watt pulse-start lamps and a patented design that makes it maintenance free, except for lamp replacement.
Features
ETL Certified �
FAA Approved: L-801 400W
A patented belt-drive system eliminates the lubrication required by conventional gear-drive beacons. U.S. Pat. 5,339,224) �
A patented liquid-filled lamp connector eliminates the slip rings and brushes found on conventional beacons. (U.S. Pat. 5,816,678)
Two 14,000-lumen, 150-watt pulse-start metal-halide lamps
Typical lamp life is 12,000 hours (3 years)
One clear lens, one aviation green lens
NO maintenance except lamp replacement
All moving parts are permanently lubricated
Impedance-protected motor eliminates burnouts �
Lamps preset 5 degrees above horizontal, adjustable �
12 RPM rotation, 24 flashes/minute �
Weatherproof steel cabinet, powder-coated international orange ��
Tested to wind velocities of 100 mph �
Optional photocell and/or tell-tale relay �
Power consumption: 395W Class I, 795W Class II �
Manufactured in the USA
Applications:
The Airport Rotating Beacon is used primarily for night operations at airports as an identification and location marker. The dual-light beacon (clear and aviation green lenses) features 150-watt pulse-start lamps and a patented design that makes it maintenance free, except for lamp replacement.
Features
ETL Certified �
FAA Approved: L-801 400W
A patented belt-drive system eliminates the lubrication required by conventional gear-drive beacons. U.S. Pat. 5,339,224) �
A patented liquid-filled lamp connector eliminates the slip rings and brushes found on conventional beacons. (U.S. Pat. 5,816,678)
Two 14,000-lumen, 150-watt pulse-start metal-halide lamps
Typical lamp life is 12,000 hours (3 years)
One clear lens, one aviation green lens
NO maintenance except lamp replacement
All moving parts are permanently lubricated
Impedance-protected motor eliminates burnouts �
Lamps preset 5 degrees above horizontal, adjustable �
12 RPM rotation, 24 flashes/minute �
Weatherproof steel cabinet, powder-coated international orange ��
Tested to wind velocities of 100 mph �
Optional photocell and/or tell-tale relay �
Power consumption: 395W Class I, 795W Class II �
Manufactured in the USA
Dimensions and Weight
Length: n/a in.
Width: n/a in.
Height: n/a in.
Shipping Weight: 38 lbs.
Length: n/a in.
Width: n/a in.
Height: n/a in.
Shipping Weight: 38 lbs.