Beacons

Item no.: Beacons
Manufactured by OkSolar
Estimated Lead Time: *

U.S.: In Stock
Europe: In Stock

OkSolar.com Approved
Official Spec Sheet ✔

Solar Aviation Warning Light for Communications Tower obstacles, Telecommunication Obstruction Light, Cranes Obstruction Light, chimney Obstruction Light, Buildings Obstruction Light, Sport Stadiums Obstruction Light, High Voltage Towers Obstruction Light, Obstruction Light, Wind Generation Obstruction Light, Hazardous obstructions to air traffic.

Solar Aviation Obstruction Light

Application:
Solar Aviation Warning Light for Masts & Tower obstacles(Telecommunication, GSM, Radio & TV), tall cranes, chimney, tall buildings, sport stadiums, Light pylons, high voltage towers, wind generation and any other potentially hazardous obstructions to air traffic.

Main functions and features
• Based on LED technology.
• Base material-Die casting aluminum LM6, housing with polycarbonate with UV resistance and bird spike.
• Built-in photocell
• Steel wire is used to connect base to housing against falling in operation.
• Built in NiMH battery, ease for replacement.
• No RF-radiations, EMC Compliant
• Shockproof and corrosion resistance
• Extremely Reliable-Major Maintenance cost saving.

Installation and Operation
• Mount the solar light in the most suitable place such as under direct sunlight, to ensure its continuous operation.
• Screw the lamp on the G3/4” threaded pipe, which should be fixed on a smooth surface with enough mechanical strength(see mounting drawing).
• When first operation, if the solar does not light up in dark places, please put the light under direct sunlight for approx. 12hrs.
• Please keep the light in a very dry and low temperature place, such as places with low humidity if do not use the light for a long time. Put the light under direct sunlight for three days every 40 days, to ensure the battery capacity.
• Built in NiMH battery, after being used 450 times(15 months), the battery capacity is approx. 80% of previous capacities, at this moment, please replace the battery in time.

Notice:
• Please read the instruction manual carefully before operation.
• For protection of batteries during transport and storage, lights bottom installed sleep switch, and is set to sleep mode, please check whether the lamp is in normal working condition before installation or testing, turn on the switch according to the instruction.
• the bottom of the switch control: Press 3 to 5 seconds, the light starts to sleep (stopped working); Press 1 to 2 seconds, the lights began to work); testing and operation of switches in the dark environments, or covered with black shade cloth in order to operate correctly.