Recommendations for installing pedestal bases, poles, and support collars.
 

Ø       Prior to pouring a concrete foundation or installing a Helix foundation, ensure the bolt circle (check project specifications for bolt circle and anchor bolt diameters) of the anchor bolts or studs are set to match the bolt circle pattern of the pedestal base.
 

Ø       Ensure the foundation is flat and level. Do not use shims.

Ø       Use the following installation hardware sized to fit either a 1” or ¼” anchor bolt

1. Large heavy duty flat washers (4 ea.)

2. Heavy duty nuts (4 ea.)

Ø       Place the pedestal base over the anchor bolts. CAUTION: Do not hammer the base in order to position the base over the anchor bolts. Notify the Project Engineer if the bolt circles do not match.

Ø       Secure the pedestal base to each anchor bolt using the hardware listed above. IMPORTANT: The large heavy duty washer ensures proper load distribution. Torque the heavy duty ground mounting nuts to 150 FT. LBS.

Ø       Thread the 4” diameter traffic pole to the base. Ensure the pole threads seat properly into the base threads. Ensure there is a minimum of 10 pole threads mated to the base threads.
 

Installations must me made by licensed technicians.

Oksolar.com is not responsible for any typographical errors. Neither OkSolar.com nor GeneralCommunications.com, corp. is not responsible or liable for errors in installations. We offer industry-standard installations recommendations guide lines; proper installation is the responsibility of the installers.

Ever-demanding traffic and rail signal applications require a constant reliability 24 hours a day, 365 days a year. By applying IQtraffiControl Illumination LED signals in place of older fluorescent or incandescent technologies, municipalities, rail yards and transit operators can benefit from recurring energy savings, lower maintenance costs and reduced safety concerns. We are manufactures OEM/ODM a complete line of high-flux LED products for the transportation market. We offer a complete line of LED products used in lighting for airports, bus stops, rail ways, traffic signals, outdoor lighting and other related applications.

Our transportation products are more efficient, last longer and typically consume 90% less energy than incandescent lights, yielding substantial operational cost savings. Because their service life span is typically 10 times (approximately eleven years) that of incandescent, these products offer even greater maintenance savings due to longer replacement intervals. In addition, they are environmentally friendly. Solar powered warning signals Using a combination of solar power and energy-efficient LED lights we allow the transportation engineer the flexibility to deliver critical warnings in virtually any location, regardless of power availability.

We offer a full array of red, yellow, green and white LED products for use in traffic signal balls, arrows and pedestrian signals, as well as a complete range of signaling products. Installation of LED Signals can offer significant savings in operating and maintenance costs resulting in a quick return on initial investment.

Easy installs onto existing sign hardware with just a simple tools wrench and a screwdriver increases fast and easy sign visibility Your next scheduled maintenance will be in 5 to 7 years!

Sample Ready to ship unit