takes great pride in offering
special application enclosures including:
explosion-proof enclosures required for potentially
combustible atmospheres; dust-tight enclosures that
operate in dusty or high-particulate environments;
and corrosion-proof enclosures that are exposed to
corrosive or oxidizing chemicals.
Enclosures are designed to protect a camera and lens
from environmental conditions including hazardous
atmospheres, weather and vandalism. Pelco
manufactures a variety of enclosures including
indoor, outdoor, explosion proof, dust-tight and
high security models.
It is important to choose the
right enclosure for your application. When selecting an enclosure consider the
following factors:
• Environment - Where will
the enclosure be installed — indoor, outdoor, and are there any adverse
environmental conditions?
• Equipment - What size and type of camera, lens (fixed or zoom), and other
attachments are required to meet the specifications of the installation?
• Power - What is the intended power source?
• Mounting - Where will the enclosure be mounted (wall, ceiling, pole)?
|
E700 Series
Dust-Tight | The E706 Series dust-tight enclosure permits the use of CCTV
cameras in small particle and dusty environments. The enclosure is
constructed from aluminum and is also available in stainless steel for use
in corrosive atmospheres.
E706 Dust-Tight |
|
EH8100 Series
Pressurized | The EH8100 Series are sealed and pressurized outdoor
enclosures designed to protect CCTV cameras operating in adverse
environmental conditions. The EH8100 Series have lens preset capabilities
and are designed to accept CCD cameras with fixed focal length or motorized
zoom lenses.
EH8100 Pressurized |
|
EHX*E Series
Explosion-Proof | The EHX*E Series explosion-proof camera enclosures are
used in explosive and hazardous atmospheres throughout the world. They are
designed to meet the rigorous requirements of explosion-proof and
dust-ignition- proof electrical equipment for installation and use in
hazardous locations. These enclosures are also waterproof and dust-tight.
EHX*E Explosion-proof |
IQUPS If you are a systems integrator, installer, engineering procurement contractor or an electrical contractor
We will work with you to design a Solar - Fuel Cell and or Wind power system for your project some applications Business - On-Grid Commercial Buildings and Off-Grid Industrial Remote electricity anytime anywhere!.
Businesses - Government Agencies and homeowners around the world are using OkSolar systems Integrated systems Solar, fuel Cells and wind energy.
Applications:
Commercial - Industrial - Disaster Relief - Military and Residential AirportIQ UPS Airfield Power Backup Electrical
Communication infrastructure(Local and Federal Government)
Base Stations for Mobil Networks that can run on Solar, Wind and Fuel Cells.IQ UPS Base stations cut diesel usage by 75 percent. IQUPS.com has designed a base station for mobile networks that would run on sun, wind power and fuel cells. Gas Stations (Powering gasoline pumps during a power failure).
Hospital EMS: IQ UPS Hospital Power Backup Electrical ( Emergency Power Back-up for Hospitals ).
Rail Roads: Railroad crossing signals backup.
Traffic intersections: backup power for critical LED traffic light intersections.
Solar Trees Arrays We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: Shading vehicles from the sun and at the same time generate Green energy. Facilitate the creation of infrastructure for electric vehicles.
Traffic Application:
-Keeping Traffic Moving When The Power Goes Out Item#1608450 Portable Solar Powered 120 volts 60Hz. or 230 Volts 50 Hz, Portable Solar Powered 220 Volts 50 Hz, Portable Solar Powered 230V 50Hz, Portable Solar Powered 220Volts 50Hz pedestrian signals, A 120 or 240 V, 100 amp, single-phase IQUPS.com transfer panel is used to activate the generator at the loss of power. According to IQUPS, the generator assumes the full load in seven seconds. When utility power is restored, the generator shuts off and signal operation is automatically returned to the normal power source. "The IQUPS1800 will completely run the intersection stoplights," said general manager for the DOT. "Other backup systems will put the lights to flashing red. When the generator kicks in on the IQUPS1800, the lights will fully function for 25 to 40 hours, depending on the load at the intersection. When power is restored, the system returns to utility power and the traffic signals do not need to be reset." Battery Backups Prevent Accidents at Critical Traffic Signals Additional Applications Being Taken for More Intersections Keeping Traffic Moving When The Power Goes Out Portable Solar Power 120 Volts 60 Hz or 230 Volts 50Hz, Traffic Portable Solar Power 120 Volts 60 Hz Thanks to new IQTraffiControl.com energy-efficiency technology, different Cities, towns and counties will keep their traffic signals safely operating even if the electricity goes out, and other local governments. Intersections have been converted to new LED signal lights utilizing more efficient, LED (light emitting diode) lamps. The new lamps cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Because LEDs use so much less electricity, it is now technically possible to provide battery backup power to alike. We also Have Fuel Cells Traffic Backups.
IQ UPS Traffic Back-up Standby Power Generation.
- Battery backup systems for LED traffic Signs -
IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With battery backup 3 power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.
OkSolar.com Affiliate
Sample Ready to ship unit
