High Security
enclosures are used where structural integrity and vandalism are a priority.
These enclosures are perfect for public areas including detention and
psychiatric facilities.
Enclosures are designed to
protect a camera and lens from environmental conditions including hazardous
atmospheres, weather and vandalism. Pelco manufactures a variety of enclosures
including indoor, outdoor, explosion proof, dust-tight and high security models.
It is important to choose the
right enclosure for your application. When selecting an enclosure consider the
following factors:
� Environment - Where will
the enclosure be installed � indoor, outdoor, and are there any adverse
environmental conditions?
� Equipment - What size and type of camera, lens (fixed or zoom), and other
attachments are required to meet the specifications of the installation?
� Power - What is the intended power source?
� Mounting - Where will the enclosure be mounted (wall, ceiling, pole)?
Selection
Guides
|
HS8080/HS8134 Indoor, Ceiling Mount | The
HS8080/HS8134 are high security ceiling mount
enclosures designed for applications requiring
maximum protection from vandalism. The HS8080 is
constructed from heavy gauge aluminum for moderate
damage resistance; the HS8134 is constructed from
heavy gauge steel for high damage resistance.
|
|
HS8000/HS8013 Indoor/Outdoor,
Wall/Ceiling/Corner | The HS8000 and HS8013 are
high security enclosures constructed from heavy
gauge steel and designed for installations such as
prisons, detention cells, etc., requiring maximum
protection from vandalism.
|
More
Information--> |
HS4514 Environmental, Bullet-Resistant
| The HS4514 Series are high security
environmental enclosures, designed for use with
CCD format cameras with fixed auto iris or
1/3-inch motorized zoom lenses. The enclosures are
designed to withstand, without penetration, rounds
fired from a .357 Magnum handgun from a distance
of 15 feet (4.6 m). |
|
HS1500/HS2000 Indoor, Corner Mount | The
HS1500 and HS2000 high security enclosures are
designed for applications such as elevators,
parking garages, classrooms, detention cells,
etc., requiring maximum protection from vandalism
in an unobtrusive package. The HS1500 is of medium
size and the HS2000 is the smaller of the two
enclosures.
|
|
HS2500 Indoor, Corner Mount | The HS2500 is
a high security enclosure designed for indoor use
in applications such as parking garages,
stairwells, detention cells, or other areas
requiring maximum protection from vandalism. The
HS2500 fits flush to the ceiling in a corner, but
can be mounted lower on the wall and still retain
its effectiveness.
|
|
HS2100 Indoor, Ceiling Mount | The HS2100
is a low profile ceiling enclosure designed for
use with solid-state CCD cameras. The unobtrusive,
compact design compliments any business or office
decor and provides maximum surveillance for fixed
camera applications.
|
|
HS3000/HS3020 Indoor, Ceiling/Wall Mount
| The HS3000/HS3020 are high security camera
enclosures designed for installations such as ATM
bank machines, prisons, detention cells, etc.,
requiring maximum protection from vandalism.
|
|
HS4012 Indoor, Ceiling/Wall/Pedestal Mount
| The HS4012 is a high security video surveillance
enclosure designed to provide a high degree of
protection against vandalism for a camera and lens
in such applications as correctional facilities,
bus stations, schools, or other indoor
applications. |
|
|
|
IQUPS If you are a systems integrator, installer, engineering procurement contractor or an electrical contractor
We will work with you to design a Solar - Fuel Cell and or Wind power system for your project some applications Business - On-Grid Commercial Buildings and Off-Grid Industrial Remote electricity anytime anywhere!.
Businesses - Government Agencies and homeowners around the world are using OkSolar systems Integrated systems Solar, fuel Cells and wind energy.
Applications:
Commercial - Industrial - Disaster Relief - Military and Residential AirportIQ UPS Airfield Power Backup Electrical
Communication infrastructure(Local and Federal Government)
Base Stations for Mobil Networks that can run on Solar, Wind and Fuel Cells.IQ UPS Base stations cut diesel usage by 75 percent. IQUPS.com has designed a base station for mobile networks that would run on sun, wind power and fuel cells. Gas Stations (Powering gasoline pumps during a power failure).
Hospital EMS: IQ UPS Hospital Power Backup Electrical ( Emergency Power Back-up for Hospitals ).
Rail Roads: Railroad crossing signals backup.
Traffic intersections: backup power for critical LED traffic light intersections.
Solar Trees Arrays We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: Shading vehicles from the sun and at the same time generate Green energy. Facilitate the creation of infrastructure for electric vehicles.
Traffic Application:
-Keeping Traffic Moving When The Power Goes Out Item#1608450 Portable Solar Powered 120 volts 60Hz. or 230 Volts 50 Hz, Portable Solar Powered 220 Volts 50 Hz, Portable Solar Powered 230V 50Hz, Portable Solar Powered 220Volts 50Hz pedestrian signals, A 120 or 240 V, 100 amp, single-phase IQUPS.com transfer panel is used to activate the generator at the loss of power. According to IQUPS, the generator assumes the full load in seven seconds. When utility power is restored, the generator shuts off and signal operation is automatically returned to the normal power source. "The IQUPS1800 will completely run the intersection stoplights," said general manager for the DOT. "Other backup systems will put the lights to flashing red. When the generator kicks in on the IQUPS1800, the lights will fully function for 25 to 40 hours, depending on the load at the intersection. When power is restored, the system returns to utility power and the traffic signals do not need to be reset." Battery Backups Prevent Accidents at Critical Traffic Signals Additional Applications Being Taken for More Intersections Keeping Traffic Moving When The Power Goes Out Portable Solar Power 120 Volts 60 Hz or 230 Volts 50Hz, Traffic Portable Solar Power 120 Volts 60 Hz Thanks to new IQTraffiControl.com energy-efficiency technology, different Cities, towns and counties will keep their traffic signals safely operating even if the electricity goes out, and other local governments. Intersections have been converted to new LED signal lights utilizing more efficient, LED (light emitting diode) lamps. The new lamps cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Because LEDs use so much less electricity, it is now technically possible to provide battery backup power to alike. We also Have Fuel Cells Traffic Backups.
IQ UPS Traffic Back-up Standby Power Generation.
- Battery backup systems for LED traffic Signs -
IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With battery backup 3 power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.
OkSolar.com Affiliate
Sample Ready to ship unit
|
We provide: Pelco EHX*E Housing explosion-proof camera housing, camera
enclosure, housing, enclosure, pelco housing, pelco enclosure, outdoor housing,
environmental housing, environmental enclosure, outdoor enclosure, indoor
enclosure, indoor housing, domes, outdoor domes, indoor domes, cctv housings,
cctv enclosure, security camera housing, security camera enclosure, relay remote control
Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
|