|
Outdoor enclosures are
designed to withstand normal extremes of tempera-ture, humidity,
precipitation and sunlight. Models are available with factory and field
installed accessories including blower, heater, window defroster, sun
shroud, thermal insulation, and 120 VAC electrical outlet.
Enclosures are designed
to protect a camera and lens from environmental conditions including
hazardous atmospheres, weather and vandalism. Pelco manufactures a variety
of enclosures including indoor, outdoor, explosion proof, dust-tight and
high security models.
It is important to choose
the right enclosure for your application. When selecting an enclosure
consider the following factors:
� Environment - Where
will the enclosure be installed � indoor, outdoor, and are there any
adverse environmental conditions?
� Equipment - What size and type of camera, lens (fixed or zoom), and
other attachments are required to meet the specifications of the
installation?
� Power - What is the intended power source?
� Mounting - Where will the enclosure be mounted (wall, ceiling, pole)?
Selection
Guides
|
|
EH2500 Series
Dust-Tight, Waterproof | The enclosures of the EH2500 Series are dust-tight
and waterproof to protect CCTV cameras from adverse environmental
conditions. Constructed from aluminum, the enclosures are compact and
lightweight. They can be installed on fixed mounts or pan/tilt units.
|
|
EH3508 Series Small
| The EH3508 Series are indoor/outdoor, low-cost camera enclosures
constructed from die cast and extruded aluminum. The EH3508 Series is the
smallest of our outdoor enclosures and can be used with cameras having fixed
focal length or motorized zoom lenses (with or without auto-iris operation).
|
|
EH3512/EH3515 Series
Small | The EH3512/EH3515 Series are indoor/outdoor, low-cost camera
enclosures constructed from die cast and extruded aluminum. The EH3512 has a
lower body length of 12.75 inches (32.38 cm) and the EH3515 has a lower body
length of 15.75 inches (40.00 cm).
|
|
EH4700 Series Medium
| The EH4700 Series are indoor/outdoor enclosures constructed from die cast
and extruded aluminum. They are available in 18-inch (45.72 cm) (EH4718) or
22-inch (55.88 cm) (EH4722) lengths.
|
|
EH4700DB Series
Small/Medium, Top Mounting | The EH4700DB Series are indoor/outdoor
enclosures constructed from die cast and extruded aluminum. They are
available in 13-inch (33.02 cm) (EH4712DB) or 18-inch (45.72 cm) (EH4718DB)
lengths.
|
|
EH5700 Series Large
| The EH5700 Series are indoor/outdoor enclosures designed for use with
Pelco's medium- and heavy-duty pan and tilts or fixed mounts. Constructed of
aluminum and available in a 23-inch (58.42 cm) length (EH5723) and 29-inch
(73.66 cm) length (EH5729), these enclosures are designed to accept 2/3-inch
and 1-inch format cameras with either fixed focal length lenses or motorized
zoom lenses. |
|
|
|
We provide: Pelco EHX*E Housing explosion-proof camera housing, camera
enclosure, housing, enclosure, pelco housing, pelco enclosure, outdoor housing,
environmental housing, environmental enclosure, outdoor enclosure, indoor
enclosure, indoor housing, domes, outdoor domes, indoor domes, cctv housings,
cctv enclosure, security camera housing, security camera enclosure, relay remote control
IQUPS If you are a systems integrator, installer, engineering procurement contractor or an electrical contractor
We will work with you to design a Solar - Fuel Cell and or Wind power system for your project some applications Business - On-Grid Commercial Buildings and Off-Grid Industrial Remote electricity anytime anywhere!.
Businesses - Government Agencies and homeowners around the world are using OkSolar systems Integrated systems Solar, fuel Cells and wind energy.
Applications:
Commercial - Industrial - Disaster Relief - Military and Residential AirportIQ UPS Airfield Power Backup Electrical
Communication infrastructure(Local and Federal Government)
Base Stations for Mobil Networks that can run on Solar, Wind and Fuel Cells.IQ UPS Base stations cut diesel usage by 75 percent. IQUPS.com has designed a base station for mobile networks that would run on sun, wind power and fuel cells. Gas Stations (Powering gasoline pumps during a power failure).
Hospital EMS: IQ UPS Hospital Power Backup Electrical ( Emergency Power Back-up for Hospitals ).
Rail Roads: Railroad crossing signals backup.
Traffic intersections: backup power for critical LED traffic light intersections.
Solar Trees Arrays We Delivered On-Site For Fast Plug and Pay Installation Solar Tree structure are designed for the following applications: Shading vehicles from the sun and at the same time generate Green energy. Facilitate the creation of infrastructure for electric vehicles.
Traffic Application:
-Keeping Traffic Moving When The Power Goes Out Item#1608450 Portable Solar Powered 120 volts 60Hz. or 230 Volts 50 Hz, Portable Solar Powered 220 Volts 50 Hz, Portable Solar Powered 230V 50Hz, Portable Solar Powered 220Volts 50Hz pedestrian signals, A 120 or 240 V, 100 amp, single-phase IQUPS.com transfer panel is used to activate the generator at the loss of power. According to IQUPS, the generator assumes the full load in seven seconds. When utility power is restored, the generator shuts off and signal operation is automatically returned to the normal power source. "The IQUPS1800 will completely run the intersection stoplights," said general manager for the DOT. "Other backup systems will put the lights to flashing red. When the generator kicks in on the IQUPS1800, the lights will fully function for 25 to 40 hours, depending on the load at the intersection. When power is restored, the system returns to utility power and the traffic signals do not need to be reset." Battery Backups Prevent Accidents at Critical Traffic Signals Additional Applications Being Taken for More Intersections Keeping Traffic Moving When The Power Goes Out Portable Solar Power 120 Volts 60 Hz or 230 Volts 50Hz, Traffic Portable Solar Power 120 Volts 60 Hz Thanks to new IQTraffiControl.com energy-efficiency technology, different Cities, towns and counties will keep their traffic signals safely operating even if the electricity goes out, and other local governments. Intersections have been converted to new LED signal lights utilizing more efficient, LED (light emitting diode) lamps. The new lamps cut the amount of electricity used by each light from as much as 150 watts to between 10 to 25 watts. Because LEDs use so much less electricity, it is now technically possible to provide battery backup power to alike. We also Have Fuel Cells Traffic Backups.
IQ UPS Traffic Back-up Standby Power Generation.
- Battery backup systems for LED traffic Signs -
IQUPS Battery Backups Prevent Accidents at Critical Traffic Signals Increase the public safety and reduced traffic congestion by allowing traffic lights to function even during a power failure. A typical traffic signal intersection experiences eight to ten local power outages annually. With battery backup 3 power, some or all the traffic control signals can continue to operate. This seamless switchover to battery power increases public safety and eliminates the need to dispatch police or other service personnel to direct traffic. If all traffic signals were converted to LEDs, the battery backup system would allow full operation of the traffic signals during a power outage, thus alleviating traffic congestion.
OkSolar.com Affiliate
Sample Ready to ship unit
 Note:
To view the above PDF documents, you will need the
free Adobe Acrobat Reader
|
